S弯内稀相气固两相流动数值研究  

Stimulation Research of Gas-Solid Two-Phase Flow in an S-Bend

作　　者：陈卫民[1] 袁国安[1,2] 肖双双[3] 

机构地区：[1]南华大学城市建设学院,湖南衡阳421001 [2]衡阳三力高科技开发公司,湖南衡阳421001 [3]南华大学船山学院,湖南衡阳421001

出　　处：《轻工机械》2014年第2期24-27,共4页Light Industry Machinery

基　　金：湖南省高校产业化培育项目(12CY011)

摘　　要：通过使用Fluent软件的Realizableκ-ε湍流模型,对S弯内稀相气固两相流动特性进行三维数值模拟,并采用定性分析的方法分析了固体颗粒对管道侵蚀的规律。结果表明:在S弯上游管段,管道内侧压力小速度大,管道外侧压力大速度小;而在速度和压力的分布在S弯下游管段则与之相反。根据体积分数与冲蚀大小的关系,可以确定φ=0°截面的外侧和φ=90°截面的内侧颗粒对管道的侵蚀最严重。The Realizable κ-ε models were used to simulate flow behavior of dilute-phase gas-solid two-phase flow in a 3 D S-bend numerically and the influence of erosion in this section was evaluated qualitatively.The results show that the pressure inside of pipe is higher than the outside of pipe while the speed of two phases inside of pipe is lower than outside of pipe in the upstream piping.The distribution rule of pressure and flow velocity in downstream piping is against to the upstream piping.It can conclude that the greatest erosion emerges in the section of φ =0° and φ =90°.

关 键 词：气固两相流 S弯 数值模拟 双流体模型 磨损 

分 类 号：O357.5[理学—流体力学]