检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:柯世堂[1] 曹九发[1] 王珑[1] 王同光[1]
机构地区:[1]南京航空航天大学江苏省风力机设计高技术研究重点实验室,江苏南京210016
出 处:《湖南大学学报(自然科学版)》2014年第4期87-93,共7页Journal of Hunan University:Natural Sciences
基 金:国家重点基础研究计划资助项目(2014CB046200);国家自然科学基金资助项目(51208254);江苏省自然科学基金资助项目(BK2012390);江苏高校优势学科建设工程资助项目
摘 要:基于风力机塔架-叶片耦合模型,采用改进的叶素-动量理论模拟了考虑平稳风修正、叶片旋转效应和空间相干性的风力机气动载荷,并基于有限元方法对该耦合模型进行了动力特性分析和风致响应时域计算.基于目标响应时程探讨了风力机塔架-叶片耦合系统在随机风荷载作用下的动力响应特性,并与不考虑叶片影响的风力机塔架风致响应进行对比分析.研究表明,在进行风力机的抗风设计时,应该考虑塔架-叶片的耦合作用.Based on the wind turbine tower-blade coupled model, the modified blade element momen- tum was used to simulate the aerodynamic loads of wind turbine model, which considers the rotational effect caused by blades and blade-tower interaction. The wind turbine tower-blade coupled model consider- ing the centrifugal force from rotational blades was established in finite element method, and the time-do- main analysis of wind-induced responses of wind turbine tower-blade coupled model was carried out. Then, the dynamic response characteristics of the wind turbine system under stochastic wind loads were discussed on the basis of the calculated results and through the contrast with the wind-induced responses of a tower without the blades. It is proposed that the wind turbine tower-blade coupled model should be adopted in wind resisting design.
关 键 词:风力机塔架-叶片耦合模型 风场模拟 风致响应 时域分析
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.12