宫瘀净胶囊成型工艺研究  

Study on the technology of Shaping in Gongyujing capsule

作　　者：秦雪梅[1] 漆小梅[1] 王知平 

机构地区：[1]山西医科大学药学院,太原030001 [2]山西省职工医学院

出　　处：《中国现代应用药学》2001年第1期22-24,共3页Chinese Journal of Modern Applied Pharmacy

基　　金：山西省科技攻关项目!编号 963 2 2 1

摘　　要：目的 :优选除杂工艺 ;确定胶囊型号和装量 ,提供封装车间的相对湿度数据。方法 :比较研究不同除杂工艺浸膏的物理性质 ,测定药粉的堆密度和临界相对湿度。结果 :高速离心法处理后的浸膏易干燥 ,其药粉流动性较好 ,吸湿率较低。结论 :选择高速离心法作为本品的除杂方法 ,确定选用 0号空心胶囊 ,装量规格 0 .45g ,封装车间的相对湿度应控制在 5 4%以下。OBJECTIVE:To choose the best process to clear impurity.To fix the type and filling capacity of capsule.To provide the relative humidity of workshop.METHODS:The nature of extract prepared with different methods were studied.The pile density and critical relative humidity were determined.RESULTS:The extract that was prepared by high speed centrifuge was easier to dry.The fluidity of the powder was better.The hygroscopicity of the powder was lower.CONCLUSION:The high speed centrifugal method was chosen.The type of capsule was defined as 0 #.The package was 0.45 gram for each capsule.The relative humidity of workshop was below 54%.

关 键 词：宫瘀净膜囊 成型工艺 临界相对湿度 批量生产 

分 类 号：R283.65[医药卫生—中药学] TQ461[医药卫生—中医学]