生物流化床处理乙二醇污水污泥膨胀问题研究  

Research on the biological fluidized bed used for treating the sludge bulking problem of ethylene glycol wastewater

作　　者：王贵宾 刘献玲 张建成 吴平[2] 

机构地区：[1]中石化洛阳工程有限公司,河南洛阳471003 [2]中国石化上海石油化工股份有限公司环保水务部,上海200540

出　　处：《工业水处理》2014年第4期60-63,共4页Industrial Water Treatment

摘　　要：针对生物流化床处理乙二醇污水过程中容易产生污泥膨胀的问题,对生物流化床运行工艺条件进行详细考察,并总结出产生丝状菌膨胀和非丝状菌膨胀的原因.结果表明,当生物流化床污泥沉降比为15％～40％,系统运行温度≥25℃,乙二醇污水pH控制在5～11,COD容积负荷＜6 kg/（m3·d）时,可以有效防止污泥膨胀现象的发生.According to the problems in bulking sludge coming into being easily in the process of treating ethylene glycol wastewater by biological fluidized bed, the conditions of biological fluidized bed running technique have been investigated in detail, and the causes of filamentous bulking and non-filamentous bulking have been summarized. The experimental results show that bulking sludge can be prevented effectively when the sludge settlement ratio of biological fluidized bed is 15%-40%, operating temperature no less than 25 ℃, pH of ethylene glycol wastewater 5- 11, and COD volume loading less than 6 kg/（m3. d）.

关 键 词：生物流化床 乙二醇污水 丝状菌膨胀 非丝状菌膨胀 

分 类 号：TU992.3[建筑科学—市政工程]