ST型锯齿波跳汰机分选锡多金属硫化矿试验研究  

Experimental study on separation of cassiterite polymetallic sulfide ore using ST saw tooth jigger

作　　者：封金鹏[1] 莫秋红[1] 罗美秀 马少健[1] 吴伯增[2] 陈锦全[2] 莫伟[1] 杨金林[1] 苏秀娟[1] 张敏[1] 

机构地区：[1]广西大学资源与冶金学院,广西南宁530004 [2]广西华锡集团股份有限公司,广西柳州545006

出　　处：《广西大学学报（自然科学版）》2014年第2期449-453,共5页Journal of Guangxi University（Natural Science Edition）

基　　金：国家自然科学基金资助项目(51264001);广西自然科学基金资助项目(2013GXNSFBA019254)

摘　　要：为优化跳汰选别条件,采用ST型锯齿波跳汰机分选锡多金属硫化矿,考察了筛下补加水、冲程、冲次、人工床层厚度等操作因素对跳汰选别效果的影响。试验结果表明,筛下补加水和冲次对跳汰选别效果影响较显著,人工床层厚度影响次之,而冲程对跳汰选别影响较小。当筛下补加水为34.2 kg/min,冲程18 mm,冲次94次/min,人工床层重量18 kg时,精矿产率、锡的品位和回收率分别达到15.76%、1.27%、85.59%。In order to optimize parameters of jigger, ST type saw tooth wave jigger was adopted to separate cassiterite polymetallic sulphides. The operating factors including adding water, stroke, fre-quency and artificial-bed stone thickness were investigated. The results show that adding water and frequency have significant effect on separation, follow by the artificial-bed stone thickness and the stroke. The concentrate yield, tin grade and recovery reach 15.76%, 1.27% and 85.59% respec-tively when the adding water, stroke, frequency and artificial-bed stone thickness are 34.2 kg/min, 18 mm, 94 beats/ min, 18 kg.

关 键 词：ST型锯齿波跳汰机 锡多金属硫化矿 重选 

分 类 号：TD922[矿业工程—选矿]