检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中国地质调查局水文地质环境地质调查中心,河北保定071051
出 处:《自动化仪表》2014年第4期83-86,共4页Process Automation Instrumentation
摘 要:根据瞬变电磁法原理及其信号特点,研制了时间域航空电磁微弱信号的数据采集器。利用LabVIEW图形化编程语言及其在数据采集、实时数据检测方面的优越性,设计了微弱信号数据采集软件。系统采用浮点放大技术对微弱信号进行动态放大,采用EPM7128芯片控制译码电路,采用TMS320F2812芯片为主控制器对数据进行处理。测试结果表明,仪器能够采集到原始二次场的有效信息,使后期对二次场随时间的变化规律的分析得到保证且性能稳定,仪器动态范围和采样速率满足设计要求。In accordance with the principle of transient electromagnetic method and its signal characteristics, the data collector for time domain aeronautical electromagnetic weak signal has been researched and designed. Taking advantage of LabVIEW graphical programming language in data acquisition and real time data detection, the data acquisition software for weak signals is designed. In the system, the weak signals are amplified dynamically by using float-point amplifying technology, the encoding circuit is controlled by EPM7128 chip, and the data are processed by TMS320F2812 chip in main controller. The test results show that the effective information of original secondary field can be collected by the instrument, thus the subsequent analysis for the secondary field variation over time is ensured and with stable performance. The instrument' s dynamic range and sampling speed satisfy the design requirements.
关 键 词:EPM7128 TMS320F2812 LabVIEW 瞬变电磁法 浮点放大 数据采集
分 类 号:TH8[机械工程—仪器科学与技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.16.38.31