一种新颖实用的铣床微机自动控制及编程系统  

A New Practical Microcomputer Automatic Control and Programming System of Milling Machine

作　　者：雷堂彩[1] 易斐章[1] 周绪康 

机构地区：[1]桂林电子工业学院电子计算机系

出　　处：《桂林电子工业学院学报》1991年第1期12-16,共5页Journal of Guilin Institute of Electronic Technology

摘　　要：本文介绍的足采用银河—80系统微机,集编程与控制为一体的数控系统。编程程序具有人机对话、汉字提示、图形显示等功能。程序分自动编程及半自动编程两种方式。可编制轮廓曲线由圆弧——直线组成的各类平面工件的加工程序,当其编制完毕即可调用插补显示程序。编程结果可用图形显示于屏幕以供验证,编程结果能直接存取于软磁盘。加工控制程序具有人机对话、动(静)态修改加工参数、自动过象限、二座标联动、正反向加工及其加工轨迹图形动态模拟显示、任意次刀补等多种功能。What is presented in this paper is the numerical control system with microcomputer of Yin He-80 which incorporates programming and controling. The programming procedure possesses the functions of man-machine interaction, chinese reminder and graphical display etc, and falls into two modes: the automatic and the semiautomatic, by means of which various planes work-piece of contour composed of arc and straight line can be drawn up and the display procedure of interpolation can presently be used. Moreover the result of programming can be checked by graphically displaying on the screen and directly accessed in the sofe disk. The various functions of the processing control procedure are as follows: man-machine interaction, dynamic or static revision of processing parameters, automaticly passing quadrant, two coordinates moving simultaneously, processing in positive and negative directions and displaying the processing locus figure, and cutting compensation any times, etc.

关 键 词：铣床 微机控制 编程系统 

分 类 号：TG547[金属学及工艺—金属切削加工及机床]