变径管连接方式对混油长度的影响  

The Impact of Variable Diameter Pipe Connection Mode on Mixed Oil Length

作　　者：王升[1] 王岳[1] 刘丽艳[1] 马跃[1] 赵振智[1] 王芙[1] 

机构地区：[1]辽宁石油化工大学石油天然气工程学院,辽宁抚顺113001

出　　处：《辽宁石油化工大学学报》2014年第1期56-59,共4页Journal of Liaoning Petrochemical University

摘　　要：在进行成品油顺序输送时,相邻批次的油品会产生一定量的混油。通过CFD软件,针对变径管变径部分连接线与直管段的角度分别为30°、45°、60°、90°的几种情况进行模拟计算,研究了变径管变径部分连接线与直管段的角度与混油段长度的关系及变化规律。结果表明,使用突扩管时,随着变径管变径部分连接线与直管段角度的增加混油段长度在逐渐减小;使用渐缩管时,随着变径管变径部分连接线与直管段角度的增加混油段长度在逐渐变长。这一结果与工程现象基本吻合。In batch transportation of finished oil products ,mixe d oil would be produced by adjacent batch oil .The cases of 30° ,45° ,60° or 90° for the joint line of the variable diameter part and the straight pipe of the variable diameter pipe were calculated by the CFD software .The conclusion show the relationship and the change law between the angle of the joint of the variable diameter part and the length were researched .The results show that with the angle increased ,the mixed oil segment length decreased in the sudden expansion pipe and the opposite conclusion in the reducer ,which was coincided with engineering basic phenomenon .

关 键 词：成品油顺序输送 混油 CFD软件 模拟计算 变径管 

分 类 号：TE832[石油与天然气工程—油气储运工程]