冲击发电机定子引线火焰钎焊工艺研究  

Research on Flame Brazing Process of Impact Stator Leaders

作　　者：杜金程[1] 

机构地区：[1]哈尔滨电机厂有限责任公司,哈尔滨150040

出　　处：《大电机技术》2014年第2期26-27,31,共3页Large Electric Machine and Hydraulic Turbine

摘　　要：本文系统介绍了冲击发电机定子引线现场火焰钎焊工艺过程,包括工艺参数的选择、钎焊工艺方法和检验过程等,现场工程结果表明采用锡铅钎焊后的接头安全可靠,完全满足设计和设备的运行要求。This dissertation introduced flame brazing process of impact generator leaders including selection of process parameters, brazing technique, inspection process and so on. The results indicate that tin-lead brazing joint is safe and reliable, which fully meet the requirements of design and equipment operation.

关 键 词：冲击发电机 火焰钎焊 异种材料 

分 类 号：TG111.7[金属学及工艺—物理冶金]