基于ATmega16单片机的数显电压表设计  

Design of ATmega16 SC Computer- based Digital Voltmeter

作　　者：王占选 赵冬娥[1,2] 王磊[1,2] 郭云飞[1,2] 刘媛媛[1,2] 

机构地区：[1]中北大学电子测试技术重点实验室,山西太原030051 [2]中北大学仪器科学与动态测试教育部重点实验室,山西太原030051

出　　处：《电声技术》2014年第4期33-36,共4页Audio Engineering

摘　　要：针对测试仪器内部直流电平检测的需要,设计了一款以ATmega16为核心,结合电阻分压网络以及反相求和电路的数显电压表。用单片机自带的十位内部ADC进行模拟数据的采集和转换,设计软件精度校准的方法实现对-19.9^+19.9 V正负量程范围内直流电平的精确测量,并用三位数码管显示,超过设定阈值产生报警。实际测试结果表明,该系统误差不超过0.1 V,具有测量精度高、成本低、性能可靠、显示清晰等优点,有着很好的实用价值。For the measurement of DC level in the test instrument, this paper presents the design proposal of digital voltmeter, by taken single chip ATmegal6 as the core and combined with the resistor divider network and inverting summing circuit. This system makes the analog data acquisition and conversion with the internal ADC , monitors the DC level of - 19.9 V N ＋ 19.9 V positive and negative rang accurately by designing the software precision calibration and using three digital tube display , and then alarms if the result exceeds a set threshold. The actual test results show that the error is less than 0.1V and the voltmeter has the advantages such as： high accuracy of measurement, low cost, stable performance, high definition of display and has a good practical application value.

关 键 词：ATMEGA16 数显电压表 内部ADC 软件校准 正负量程 

分 类 号：TM932[电气工程—电力电子与电力传动]