利用废弃杨木水泥模板生产纤维板的研究  

Study on manufacturing of re-cycled fi berboard by using abandoned poplar cement template

作　　者：PHAM TUONG LAM 邓玉和[1] 王新洲[1] TRAN MINH TOI 杨莹[1] 王向歌[1] 董葛平[1] CAO QUOC AN 

机构地区：[1]南京林业大学材料科学与工程学院,江苏南京210037 [2]越南林业大学,越南河内

出　　处：《中南林业科技大学学报》2014年第3期109-116,共8页Journal of Central South University of Forestry & Technology

基　　金：江苏高校优势学科建设工程资助项目;江苏省普通高校研究生科研创新计划项目(CXLX12_0532)

摘　　要：利用废弃杨木水泥模板制造纤维板,以实现保护环境,综合利用有限资源的目的。首先对废弃水泥模板组成单元-单板的密度、强度、吸水性和微观构造进行研究,并分析其纤维得率。在此基础上,以废弃水泥模板为原料制造不同密度的纤维板,并与杨木纤维及水泥模板纤维为原料制造不同比例的混合纤维板进行性能对比分析。结果表明:废弃水泥模板的单板气干密度、弹性模量和静曲强度以及纤维得率均高于普通杨木单板,而吸水厚度膨胀率小于普通杨木单板;当用水泥模板制得的纤维板密度达到0.75 g/cm3时,板材的力学性能和TS值均优于其他目标密度的板材,各项力学性能都达到国家标准的要求,且超过了普通杨木纤维板,说明废弃杨木水泥模板完全可以作为纤维板生产的好原料。The abandoned poplar cement formworks have been manufactured into fiberboards to achieve the purpose of environmental protection and comprehensive utilization of limited resources. The density, strength, water-absorption, microstructure and fiber yield of the veneer in the abandoned cement formwork were analyzed. Based on this, the effects of board density on the mechanical and physical properties of fiberboard were studied and the comparative analysis with general poplar fiberboard was also investigated. The results show that the air-dry density, modulus of elasticity, modulus of rupture, and fiber yield of veneer of cement formwork were higher than that of poplar veneer, while the thickness swelling was smaller than that of the latter. Both the mechanical properties and TS values reached to a maximum and higher than that of general fiberboard when the board density was 0.75 g/cm3, which met the demands of China Standards. Thus, it was possible to manufacture qualified fiberboard by using the deserted poplar cement formwork as the material instead of poplar wood.

关 键 词：废弃水泥模板 综合利用 再生纤维板 物理力学性能 

分 类 号：S792.11[农业科学—林木遗传育种] TS653[农业科学—林学]