高温气冷堆核电站的一种仿真方法  

A Simulation Method for Nuclear Power Plant with High-Temperature Gas-Cooled Reactor

作　　者：陈杨[1,2] 游江洪[1] 邵之江[1] 钱积新[1] 史旭华[2] 

机构地区：[1]浙江大学工业控制技术国家重点实验室,浙江杭州310027 [2]宁波大学信息学院,浙江宁波315211

出　　处：《高校化学工程学报》2014年第1期110-114,共5页Journal of Chemical Engineering of Chinese Universities

基　　金：国家973课题(2009CB320603);浙江大学国家重点实验室开放课题(ICT1237);宁波大学人才工程项目资助(010_D00079124900);浙江省公益科技项目(2011C21077)

摘　　要：高温气冷堆核电站集总参数模型为大规模微分代数混合方程组(DAEs),该DAEs具有刚性特征,因此模型存在求解上的困难。研究给出了一种能够有效求解高温气冷堆核电站集总参数模型的数值方法。首先分析了核电站模型的特点;针对该特点,可采用基于Radau配置点的有限元正交配置法对模型进行离散,然后调用IPOPT求解器求解离散后的大规模非线性规划问题;最后采用该求解策略对高温气冷堆核电站模型进行仿真验证,仿真结果表明了算法的准确性与高效。The model of nuclear power plant （NPP） with high-temperature-gas-cooled reactor （HTR） can be described by differential-algebraic-equations （DAEs）, However, the model equations are difficult to be solved because of their stiff properties and large scale. Now a numerical simulation method for solving the model equations was presented. Based on analyzing the characteristic of the NPP model, the model can be discretized by using the method of orthogonal collocation on finite elements （OCFE）, and then the large scale nonlinear programming problems obtained by the discretization were solved by using IPOPT solver. Finally, using above solving strategy, the simulation of the model of NPP with HTR was verified. The simulation results show that the above calculation methods are accurate and highly efficient.

关 键 词：高温气冷堆核电站 DAES 有限元正交配置法 仿真 

分 类 号：TL48[核科学技术—核技术及应用] TQ391.9[化学工程]