检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]江西铜业集团(德兴)建设有限公司,江西德兴334224 [2]江西铜业集团(德兴)铸造有限公司,江西德兴334224 [3]西安理工大学材料科学与工程学院,陕西西安710048
出 处:《铜业工程》2014年第2期1-4,共4页Copper Engineering
摘 要:采用销—盘式摩擦磨损试验机研究了液相烧结制备Mo5Si3颗粒弥散强化铜合金在滑动干摩擦条件下的摩擦磨损行为。结果表明:Cu/Mo5Si3p复合材料具有优良的摩擦磨损性能。随着Mo5Si3含量的增加Cu/Mo5Si3p复合材料的硬度增加,摩擦系数和磨损失重量降低。Mo5Si3含量低时,Cu/Mo5Si3p复合材料的磨损机制为犁沟变形和粘着磨损为主,而Mo5Si3含量高时则为犁沟变形磨损为主。The friction and wear behaviors of Mos Si3 particles dispersion reinforced copper matrix composite material prepared by liquid sintering were investigated by pin - on - disk tester under the condition of dry sliding against 45# steel. The results show that the Cu/Mo5 Si3p composite material has excellent friction and wear properties. The hardness of Cu/Mo5 Si3p composite material would be in- creased, and the friction coefficient and wear weight - loss would be decreased, with the increase of Mo5 Si3 content. The wear mecha- nism of Cu/Mo5Si3p composite material is dominated by groove deformation and adhesive wear when MosSi3 content is lower, but is dominated by groove deformation when Mos Si3 content is higher.
关 键 词:MO5SI3 铜基复合材料 摩擦磨损 制备 颗粒强化 磨损机理
分 类 号:TG146[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.116