检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]山东交通学院土木工程学院,济南250357 [2]高速公路养护技术交通行业重点实验室,济南250031
出 处:《重庆大学学报(自然科学版)》2014年第4期100-108,共9页Journal of Chongqing University
基 金:交通运输部应用基础研究项目(2011 319 817 480);山东省交通科技创新计划项目(2011-10);山东交通学院科研基金项目(Z201244)
摘 要:为了获取真实反映沥青路面结构力学特性和材料性状的结构模量参数,铺筑了4种结构级配碎石基层沥青路面足尺试验路,对其进行加速加载疲劳破坏试验和路面弯沉检测。基于FWD弯沉测试方案,应用分层检测分析方法逐层检测了路面结构层的弯沉,并根据足尺路面加载破坏的损坏程度,进行了路表FWD弯沉测试和弯沉迭代反演,分析了FWD反算模量受荷载水平、位置和路面温度的影响规律,建立了FWD反算模量与实验室动态模量的关系,提出了沥青混凝土、级配碎石和路基土实验室动态模量与FWD反算模量的换算系数K。研究结果表明:沥青混凝土模量受温度和轮载作用的影响最大,路面结构完好的沥青层反算模量换算系数 K=0.7~1.0;路面出现Top-down开裂后,K=1.3~1.5;沥青层层底出现疲劳破坏时,K>1.5;级配碎石层反算模量换算系数为1.32~1.49;土基反算模量换算系数与其所受的应力水平及土质类型相关,随应力水平的降低,土基反算模量换算系数减小。In order to get pavement structure modulus w hich can real reflect pavement mechanical characteristics and the properties of pavement materials ,four kinds of full-scale unbound aggregate base asphalt pavement test road are constructed ,accelerated pavement testing is conducted and pavement deflection is tested .Based on FWD testing program ,layered measure and analysis method are introduced to measure deflections ,FWD deflection testing is conducted in different stages of pavement damage . T he influence characteristics of loading level ,position and pavement temperature on FWD backcalculated modulus are analyzed ,the relationship between FWD backcalculated modulus and laboratory dynamic modulus is established ,and the conversion coefficients of asphalt concrete ,unbound aggregate and subgrade soil are put forward .The results show that the asphalt concrete modulus is greatly affected by temperature and w heel loads ,asphalt layer backcalculated modulus conversion coefficients is of 0 .5 to 1 .0 if the pavement is in good condition ,and it is of 1 .3 to 1 .5 if pavement top-dow n cracking is occurred .If the pavement is damaged at the bottom of the asphalt layer ,the conversion coeefient is more than 1 .5 .The conversion coefficient of unbound aggregate is of 1 .32 to 1 .49 ;the subgrade soil backcalculated modulus conversion coefficient is related with stress level and soil types ,the conversion coefficient of inverse modulus for soil base decreases with decreasing stress .
关 键 词:沥青路面 级配碎石基层 反算模量 换算系数 落锤式弯沉仪 加速加载试验
分 类 号:U416.217[交通运输工程—道路与铁道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117