充填料浆十字板剪切测试分析  

Analysis on Vane Shear Test of Filling Slurry

作　　者：邓代强[1,2] 吴鸿云[1,3] 袁爱平[4] 何远富[1,2] 

机构地区：[1]长沙矿山研究院有限责任公司,长沙410012 [2]国家金属采矿工程技术研究中心,长沙410012 [3]中南大学资源与安全工程学院,长沙410083 [4]北京科技大学土木与环境工程学院,北京100083

出　　处：《地下空间与工程学报》2014年第2期299-303,321,共6页Chinese Journal of Underground Space and Engineering

摘　　要：为了解采空区中充填料浆所呈现的状态,基于充填对二步骤安全开采的重要性,本研究采用十字板剪切测试的方法,进行了不同浓度及配比充填料浆原状剪切应力Cu、扰动剪切应力C'u、灵敏度St参数的测试,并分析了这些指标的变化规律。结果表明:浓度较高的充填料浆具有较强的结构性,其原状剪切应力较大,扰动后强度大幅减小;料浆浓度很低时,剪切应力产生的压力不足以使剪切仪传感器产生明显变形,当浓度增加时料浆剪切应力增大;相同浓度的不同配比料浆,随着水泥量增大,剪切应力也随之增大,研究可为采空区充填工艺优化与改进提供依据。Considering the importance of the two-step safe mining system, we should know the states of filling slurry in complicated goal In this study, we used the method of field vane test on filling slurry with different concen- trations and mix proportions, then received several groups of indexes about undisturbed shear stress （ C_u） , disturbed shear stress（ C＇_u ） and sensibility（ S_t ） , with analyzing the change law of the indexes. The results showed that high- concentration filling slurry bad more strong structural property and greater C_u , and by disturbing the high-concentra- tion filling slurry, the strength was decreased greatly. For the low concentration of slurry, there was no any obvious transfiguration of stress observed, shear stress increased with concentration of slurry. Also, the Cu increased with in- creasing concentration of cement for the same concentration and different mix proportions of slurry. Therefore, the studies can provide essential theoretical method and tactical support for the process optimization and improvement for the goaf filling slurry.

关 键 词：充填料浆 十字板 灵敏度 剪切强度 饱和砂浆 

分 类 号：TD862[矿业工程—金属矿开采] TU411.7[矿业工程—矿山开采]