变截面管桩水平承载性状模型试验研究  

Model Test Study of Horizontal Bearing Behaviors of Variable-Section Pipe Piles

作　　者：尹宏春 杨庆光[1] 刘杰[1] 

机构地区：[1]湖南工业大学土木工程学院,湖南株洲412007

出　　处：《湖南工业大学学报》2014年第2期38-41,共4页Journal of Hunan University of Technology

基　　金：国家自然科学基金资助项目(51208194)

摘　　要：在室内基坑中对1根等截面管桩和2根变截面管桩进行单桩水平静载荷模型试验,对比研究两类管桩单桩水平承载性能方面的差异。试验结果表明:等截面模型管桩与变径比为0.57与0.71的变截面模型管桩的单桩水平的临界荷载依次为1.2,1.6,1.2 kN;单位体积水平承载力特征值依次为95,147,115 kN/m3。变径比为0.57与0.71的变截面管桩的单位水平承载能力比等截面管桩分别提高了55.1%和21.6%;变截面管桩变径比越小,单位水平承载能力越大;材料的利用率也越高。Makes single pile horizontal static load model tests on an equal-diameter pipe pile and 2 variable-section pipe piles in the indoor foundation pit, and compares and studies their difference of horizontal bearing capacity. The results show that： the critical load of equal-diameter pipe pile and variable-section pipe piles of variable section ratio of 0.57 and0.71 is 1.2, 1.6 and 1.2 kN, respectively; their characteristic value of horizontal bearing capacity per unit volume is 95, 147 and115 kN/m3, respectively. The pipe piles of variable section ratio of 0.57 and 0.71 improve horizontal bearing capacity of 55.1%and 21.6% per unit volume respectively comparing to equal-diameter pipe pile; and the smaller variable section ratio of variable-section pipe pile is, the greater horizontal bearing capacity per unit volume is and the higher material utilization is.

关 键 词：水平静载荷 变截面管桩 等截面管桩 单位体积水平承载力 

分 类 号：TU473.1[建筑科学—结构工程]