基于流程的动车组制动系统试验方法  

Experiment Method of Motor Car Barking System Based on Procedure

作　　者：沈华波[1] 赵建博[1] 朱西深[1] 居法云[2] 杨欢[3] 

机构地区：[1]南车青岛四方机车车辆股份有限公司,技术工程部,山东青岛266000 [2]北京航天测控技术有限公司,北京100041 [3]中国航天科工信息技术研究院,北京100070

出　　处：《计算机测量与控制》2014年第5期1481-1483,共3页Computer Measurement &Control

摘　　要：针对动车组制动系统试验自动化智能化的需求,提出了一种基于流程的动车组制动系统试验方法,将工艺流程编辑和调试运行分开,通过一个通用软件平台加载不同的调试工艺流程完成试验;该方法定义了一套指令信号描述规范,工艺人员按照规范以流程化的方式描述调试流程,在调试过程中采用通用软件平台依次执行调试步骤,驱动仪器完成相关动作;通过该方法固化了调试流程,提高了1倍的调试效率。The report proposes a experiment method of motor car barking system based on procedure, focusing on the requirement of the experiment of motor car barking system automatically and intelligently. The experiment is done by a general software platform which loads all kinds of procedures, and the procedure is edited and run on the general software separately. The method defines signal describe standard. The craftsperson describes the procedure based on standard. The general software platform runs procedure in proper order, and makes ma- chines doing actions. The procedure is regular and the efficiency is raised double by this method.

关 键 词：流程化 制动试验 通用软件平台 

分 类 号：U266[机械工程—车辆工程] U270.14[交通运输工程—载运工具运用工程]