卡链工况下刮板输送机圆环链张力分析  

Tension analysis for round-link chain of scrape conveyer under jammed-chain condition

作　　者：管长焦[1] 

机构地区：[1]煤炭科学研究总院沈阳研究院,抚顺113122

出　　处：《起重运输机械》2014年第5期81-83,共3页Hoisting and Conveying Machinery

摘　　要：针对刮板输送机卡链工况,在考虑输送机中部槽的弹性和间隙、链轮与链条啮合特性等因素的基础上,建立了刮板输送机非线性动力耦合模型;通过仿真分析,得到了卡链工况下链条的最大动载;以仿真得到的最大动载为输入载荷,通过Ansys仿真分析了圆环链的受力状态。For chain jamming conditions in the scrape conveyor, the non-linear dynamic coupling model is buih based on consideration of flexibility and gap of middle trough, wheel and chain fitting features, etc. ; through simulation analysis, the maximum dynamic load under chain jamming condition is figured out, which is taken as input load to analyze the load bearing state of round-link chain by Ansys.

关 键 词：刮板输送机 卡链 有限元分析 圆环链 张力 

分 类 号：TD528.3[矿业工程—矿山机电]