防辐射驾驶舱屏蔽层支撑座的结构分析与优化  

The Structure Analysis and Optimization of Radiation Protection Cockpit Shielding Layer Supporting Pedestal

作　　者：陈桂荣[1] 任勇[1] 邱长军[1] 邹树梁[1] 李林升[1] 周炬[1] 

机构地区：[1]南华大学机械工程学院,湖南衡阳421001

出　　处：《南华大学学报（自然科学版）》2014年第1期59-62,68,共5页Journal of University of South China：Science and Technology

基　　金：湖南省重大科技专项基金资助项目(2012FJ1007);湖南省重点学科建设基金资助项目(湘教发[2011]76号);湖南省高校科技创新团队支持计划(湘教通[2012]318号)

摘　　要：由于增加屏蔽层后的防辐射驾驶舱较之原来驾驶舱增重了5.5 T,故有必要对支撑座的强度进行分析与校核.本文运用ANSYS Workbench对挖掘机驾驶舱屏蔽层的支撑座进行结构静力分析,得到支撑座在5.5 T载荷下的等效应力、变形等分布情况.通过目标驱动优化模块,在满足工况条件下对支撑座截面厚度尺寸进行优化,为支撑座设计提供了依据.Due to the adding of the shielding layer,the radiation protection cockpit increased 5.5 T compared with the original weight,which made it necessary to analyze and check the strength of the supporting pedestal. In this paper,the static analysis on the structure of an ex-cavator cockpit shielding layer supporting pedestal was achieved by means of ANSYS Work-bench,and the equivalent stress and deformation distribution of supporting pedestal under the load of 5. 5 T were obtained. The thickness size of the supporting pedestal section was optimized in order to get the best program under the working condition by using goal driven optimization module,which provided the basis for the supporting pedestal＆#39;s design.

关 键 词：辐射防护 支撑座 ANSYS WORKBENCH 结构静力分析 目标驱动优化 

分 类 号：TU621[建筑科学—建筑技术科学]