MA-St型低温流动改进剂的制备及性能评价  

Preparation and performance evaluation of cold flow improver for MA-St

作　　者：龙小柱[1] 徐磊[1] 孙威[1] 刘杰[1] 张广明[1] 

机构地区：[1]沈阳化工大学化学工程学院,辽宁沈阳110142

出　　处：《应用化工》2014年第5期843-846,共4页Applied Chemical Industry

基　　金：辽宁省教育厅高等学校科学研究项目(L2013169)

摘　　要：采用"先酯化,后聚合"的方法,以马来酸酐、苯乙烯、十六醇、二十二醇为原料,合成了低温流动性改进剂马来酸酐混合酯-苯乙烯共聚物,最佳制备条件为:①酯化:n(马来酸酐)∶n(混合醇)=0.5∶1,w(催化剂)=1.8%、w(溶剂)=90%,酯化时间2.5 h;②聚合:n(苯乙烯)∶n(马来酸酐混合酯)=1∶1,w(引发剂)=1.25%,聚合温度为75℃,聚合时间4 h,溶剂用量为55%。将合成的产物按1.0‰的剂量加入到俄罗斯原油提炼的俄柴油中,冷滤点可降低12℃。The copolymer maleic anhydride mixed ester-styrene is prepared by esterification and polymeri-zation using maleic anhydride,styrene,behenyl alcohol,hexadecyl as raw materials. The copolymer can be used as diesel low temperature flow improver. The optimum conditions are obtained as follows：Esterifica-tion：the mole ratio of maleic anhydride to mixed alcohol was 0. 5 ： 1;amount of catalyst was 1. 8% ;amount of solvent was 90% ,esterification time was 2. 5 h. Polymerization： n（ styrene）： n（ maleic acid double chain mixed ester）= 1： 1,amount of initiator was 1. 25% ,polymerization temperature was 75 ℃ , polymerization time was 4 h,amount of solvent was 55% . ΔCFPP of the diesel oil was most lowered by 12 ℃ when the dosage of the diesel flow improver was 1. 0‰ in the diesel oil of Russia.

关 键 词：柴油 冷滤点 马来酸酐 混合酯 苯乙烯 

分 类 号：TQ047.5[化学工程]