非成像式激光告警系统的光学设计及优化  

Optical design and optimization for laser warning system with non-imaging mode

作　　者：李冰[1] 赵跃进[1] 张超[2] 郭小虎[1] 张镜水[1] 孔令琴[1] 

机构地区：[1]北京理工大学光电学院,北京100081 [2]中国环境管理干部学院现代化教学中心,河北秦皇岛066000

出　　处：《红外与激光工程》2014年第5期1511-1516,共6页Infrared and Laser Engineering

基　　金：2010北京市优博指导教师科研项目(YB20101000701)

摘　　要：针对非成像式激光告警系统的工作特点与要求，提出并设计了一种双片式柱透镜光学结构。对柱面光线追迹以及柱透镜成像进行了深入分析，提出了一种新型像差优化方法，使其在子午方向各个视场的调制传递函数得到最大幅度的优化。此光学系统由两片硒化锌柱透镜组成，满足了1.0~4.0μm工作波长范围，并且克服了传统单片式柱透镜和柱面反射镜视场通常小于1o且聚焦线斑不理想的缺点，其视场达到20o，在7 lp/mm空间分辨率条件下，边缘视场子午方向的调制传递函数值优于0.7，达到了非成像式激光告警系统的要求。Based on the characteristic of laser warning system with non-imaging imaging mode, a double cylindrical lens system was presented. A new optimization method, based on the ray tracing of cylindrical lens, was introduced in this paper. Traditional single-cylindrical lens and cylindrical reflector systems were limited by FOV, less than 1o, and low-quality line spot. This optical system, composed by two ZnSe cylindrical lenses, meets the operating wavelength of 1.0- 4.0 μm and achieves a 20o FOV and the modulation transfer function（MTF） is better than 0.7 at 7 lp/mm on the edge of FOV. This optical system achieves the requirement of laser warning system with non-imaging mode.

关 键 词：光学设计 激光告警 柱透镜 线聚焦 光线追迹 

分 类 号：O439[机械工程—光学工程]