基于氢闸流管感应叠加技术的电磁脉冲源实验  

Repetitive frequency pulse based on hydrogen thyratron inductive-adder

作　　者：于成大[1,2] 邓启斌[3] 连志平[3] 王永峰[3] 殷树鹏[3] 

机构地区：[1]北京理工大学机电学院 [2]复杂地面系统仿真重点实验室 [3]中国人民解放军63961部队

出　　处：《强激光与粒子束》2014年第6期217-221,共5页High Power Laser and Particle Beams

基　　金：国家自然科学基金项目(61171018);国家重大基础研究项目(613196)

摘　　要：介绍了一种基于感应叠加技术的重复频率脉冲源,分析了同轴屏蔽输出结构磁场的分布。实验时,充电电源工作电压为25 kV,脉冲输出重复频率为20 Hz,2个氢闸流管器件参数相差较大,栅极触发时钟存在约5 ns延时。实验结果表明:氢闸流管触发稳定可靠,输出的脉冲前沿及稳定性仍然不受影响,输出脉冲幅值约为50 kV,证明了感应叠加技术应用于气体开关的可行性。A high voltage repetition pulse output based on the application of the hydrogen thyratron coupling with inductiveadder is proposed and the magnetic distribution with coaxial shielding structure is analyzed.The amplitude of working voltage is 25 kV,the repetitive frequency of pulse waveform is 20 Hz and the trigger delay of grids is 5 ns due to the differences of the devices parameters.The experiment results show that the hydrogen thyratron trigger is stable and reliable,and the application of the inductive-adder output mode based on the coaxial shielding has less impact on the reliability and the rising edge of the output pulse wavdorm and the amplitude of output pulse is about 50 kV,and the feasibility of inductive-adder technique applied in gas switch is confirmed.

关 键 词：氢闸流管 感应叠加 重复频率脉冲 磁场 火花开关 触发时钟 

分 类 号：TM303.1[电气工程—电机]