基于SF_6气体分解产物检测的气体绝缘开关设备状态监测  

Gas-insulated switchgear state monitoring based on SF_6 decomposition products detection

作　　者：颜湘莲[1] 宋杲[1] 王承玉[1] 季严松[1] 杨韧[2] 菅永峰[2] 刘汉梅[1] 

机构地区：[1]中国电力科学研究院,北京100192 [2]陕西电力科学研究院,陕西西安710054

出　　处：《电力自动化设备》2014年第6期83-88,95,共7页Electric Power Automation Equipment

基　　金：国家电网公司2009年科技项目;国家电网公司2011年科技项目;国家电网公司2012年科技项目~~

摘　　要：分析了SF6气体分解产物检测方法,开展了气体绝缘开关设备(GIS)设备分解产物带电检测,对检测结果进行了统计分析,得到了不同类型设备中的分解产物特性。统计分析结果表明,正常运行设备均未检测到SO2和H2S组分,50%以上的设备检测到CO组分但含量不超过20μL/L,互感器检测到CO组分概率稍高且含量较大。对检测到SO2组分的设备气室进行了跟踪检测,结合设备运行工况,对设备状态进行了综合判断,通过解体检查验证了SF6气体分解产物检测措施及状态监测结果的有效性。The method of SF6decomposition products detection is analyzed and the online decomposition products detection is carried out for different grid GISs（Gas-Insulated Switchgears）. The detection results are statistically analyzed and the decomposition products characteristics of different GISs are obtained,which shows that,no SO2or H2S content is detected in normally operating GISs;more than 50 % of GISs contain CO with the concentration less than 20 μL / L;the probability of transducer containing CO and with higher concentration is big. The GISs containing SO2are traced and combined with the operating conditions,their states are comprehensively estimated. The inspection by GIS disassembly verifies the effectiveness of the proposed detection method and monitoring results.

关 键 词：SF6 分解产物 气体绝缘开关设备 监测 绝缘 

分 类 号：TM56[电气工程—电器]