A301氨合成催化剂最佳操作条件与催化活性的关系  被引量:7

OPTIMAL OPERATION CONDITIONS OF AMMONIA SYNTHESIS AND CATALYTIC ACTIVITY FOR A301 CATALYST

在线阅读下载全文

作  者:刘化章[1] 李小年[1] 胡樟能[1] 岑亚青[1] 傅冠平[1] 

机构地区:[1]浙江工业大学催化研究所,浙江省多相催化重点实验室,杭州市310014

出  处:《化学反应工程与工艺》2001年第1期28-34,共7页Chemical Reaction Engineering and Technology

基  金:九五攻关项目 !(No 96 - 5 5 0 - 0 2 - 0 1)

摘  要:用高压氨合成催化剂性能评价装置 ,研究了反应温度、压力、空速、惰性气体含量、氢氮比和催化剂粒度对 A30 1催化剂活性的影响。A30 1催化剂在 15 MPa下的最适反应温度在 430~ 480℃ ,在 7MPa下在 376~ 45 0℃ ,比 A110 - 2低 15~ 35℃。A30 1催化剂的最佳 H2 ,N2 摩尔比 nm在 45 0℃时为 2 .5 5~ 3.0 ,在 40 0℃时为 2 .2 3~ 2 .5 5 ,在 35 0℃时为 1.76~ 2 .2 2 ,并可用 nm=1 .5 0 +1 .49( c NH3/ c*NH3)来表示。惰性气体含量会使催化剂活性大幅度降低 ,每当惰性气体含量增加 1 % ,出口氨浓度 (氨净值 )平均降低 0 .2 %~ 0 .3 5 %。颗粒大小对活性或反应速率有严重的影响 ,其内表面利用率受反应温度和催化效率两个因素的影响 ,对于高活性的 A3 0 1催化剂 ,催化效率的因素起主要作用。根据实验结果和合成氨反应的基本理论 ,讨论并提出了A3 0The influences of temperature, pressure, space velocity, concentration of inert gas, ratio of hydrogen to nitrogen and particle size on the activity of A301 catalyst were investigated. The optimal reaction temperatures for A301 catalyst are in the range of 430 [similar to] 480°C at 15MPa of pressure and 376 [similar to] 450°C at 7MPa of pressure, 15 [similar to] 35°C lower than A110-2 catalyst. The optimal ratios of hydrogen to nitrogen nm for A301 catalyst are 2.55 [similar to] 3.0, 2.23 [similar to] 2.55 and 1.76 [similar to] 2.22 at temperature of 450, 400 and 350°C respectively, and may be expressed by equation of nm = 1.50 + 1.49 (cNH3/cNH3*). The more the content of inert gas (CH4 + Ar), the lower the outlet ammonia concentration. When the content of inert gas increased by one percent, the outlet ammonia concentration lowered 0.2% [similar to] 0.35%. The use ratio of inner face of a catalyst is not only related to the particle size but also to temperature and catalytic efficiency. But the catalytic efficiency acts mainly for high active A301 catalyst. According to the experiment results and the principle of ammonia synthesis, optimal operation conditions of ammonia synthesis on the A301 catalyst were proposed.

关 键 词:A301催化剂 合成氨 最佳操作工艺条件 催化活性 

分 类 号:TQ113.247[化学工程—无机化工] O643.361[理学—物理化学]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象