厚铝合金-薄不锈钢复合板爆炸焊接工艺研究  

Study on the Explosion Welding Process of Thick Aluminium Alloy-Stainless Steel Clad Plate

作　　者：崔卫超[1] 辛宝[1] 徐宇皓[1] 王宾宾[1] 

机构地区：[1]中国船舶重工集团公司第七二五研究所,河南洛阳471023

出　　处：《材料开发与应用》2014年第2期47-49,共3页Development and Application of Materials

摘　　要：研究了6061铝合金(厚度为28 mm)-304L薄不锈钢(厚度为4 mm)复合板的爆炸焊接工艺。结果表明,以薄不锈钢为基层,纯铝为过渡层,分别以12 mm和16 mm厚的铝合金为复层进行3次爆炸焊接,可得到性能合格的厚铝合金-薄不锈钢复合板。The explosion welding process of aluminium alloy 6061（ thickness of 28 mm） and stainless steel 304L（ thickness of 4mm） was investigated. The resutls showed that with stainless steel for base plate,pare aluminium for transition layer and aluminium alloy（ thickness of 12 mm and 16 mm） for fly plate,qualified thick aluminium alloy-thin stainless steel clad plate could be obtained after three times of explosion welding.

关 键 词：铝合金-不锈钢复合板 爆炸焊接 工艺试验 

分 类 号：TG456.6[金属学及工艺—焊接]