S632型浆纱机的应用实践  

Application of S632 Sizing Machine

作　　者：陈新会[1] 

机构地区：[1]咸阳华润纺织有限公司,陕西咸阳712000

出　　处：《棉纺织技术》2014年第6期62-65,共4页Cotton Textile Technology

摘　　要：探讨S632型浆纱机上浆工艺。介绍了S632型七单元浆纱机的主要结构特点,并与S432型浆纱机进行了对比。举例说明了S632型浆纱机生产特细号高密织物中应采取的工艺措施。指出S632型浆纱机浸浆长度较短,主浆槽容积较小,在没有配置预湿浆槽的情况下,易出现表面上浆、起机带浆皮等问题,在设置工艺时应有别于S432型浆纱机。认为:采用S632型浆纱机生产特细号高密品种时,应用"高浓、高压、低黏"上浆工艺有利于稳定浆轴质量。Abstract The sizing process of S632 machine was discussed. The main structural features of S632 seven unit sizing machine were described, and compared with the S432 sizing machine. The processing measure that should be taken in S632 sizing machine producing super fine high density fabric was introduced. The result shows that S632 sizing ma- chine has shorter immersion size length, smaller main size box volume. Surface sizing is easily appearance in the ab- sence of configured pre-wet size box, processing parameter should be different from S432 sizing machine. It is consid- ered that size process of high concentration ＆ high pressure ＆ low viscosity is conducive to a stabilize loom beam quality when using S632 sizing machine producing super fine high density fabric.

关 键 词：浆纱机 浆槽 预湿浆槽 压浆力 浆液浓度 浆液黏度 

分 类 号：TS105.213[轻工技术与工程—纺织工程]