SF_6连续恒量释放法在矿井巷道漏风检测中的应用  

Determination of Air Leakage by Using the Method of Continuous Quantitative Releasing SF_6 in Mine Tunnel Shaft

作　　者：于树江[1] 杨成轶[1] 徐纪元[1] 

机构地区：[1]中国矿业大学(北京)资源与安全工程学院,北京100083

出　　处：《科技导报》2014年第15期58-61,共4页Science & Technology Review

基　　金：国家自然科学基金(煤炭联合)重点项目(U1261214);国家自然科学基金项目(51074168)

摘　　要：在矿井通风网络有较大漏风时,将形成结构复杂的通风网络,使采取通风系统的稳定性、可靠性受到一定程度的影响,若漏风通道连通火区,则可能带来极为严重的后果。运用SF6连续恒量释放法,对北祖矿9211风巷漏风情况进行测定,定性判断出有风流漏入9211风巷。通过确定最短采样距离、采样时间及SF6释放量等漏风测定参数,定量计算了漏入风量及漏风率的大小,结合SF6气体浓度的变化,确定9211风巷巷道内有两处漏风区域,进而为采取针对性的防治矿井漏风措施提供判断依据,同时为该矿火灾防治提供技术支持。coal mine might become a complex ventilation network to influence the stability and the reliability of the mine ventilation system when some large air-leakages exist in the underground coal mine. If the air leakage passage is connected with a fire area, the very serious results will be brought about. The air leakage of the 9211 airway in the Beizu mine shaft is measured by using the method of the continuous and quantitative releasing of SF6, and the air flow leaking into the 9211 air way can quantitatively determined. The amount of the air leakage is calculated by determining the shortest distance of the detection, the detection time, the release volume and other air leakage determination parameters, according to the change of the concentration of SF6 gas. Two air leakage areas in the 9211 air way are detected, to provide a foundation to take corresponding measures of prevention and control of the mine air leakage, and the technical support to the mine fire prevention.

关 键 词：示踪技术 SF6示踪气体 连续恒量释放 漏风量 

分 类 号：TD754[矿业工程—矿井通风与安全]