检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西南交通大学电磁场与微波技术研究所,成都610031
出 处:《强激光与粒子束》2014年第7期195-198,共4页High Power Laser and Particle Beams
基 金:国家自然科学基金重点项目(61231003);高等学校博士学科点专项科研基金项目(20120184110013)
摘 要:当传输线上通有电压和电流信号时,会在其周围的传输线上产生串扰响应。采用时域BLT方程建立多导体传输线对多导体传输线的串扰模型,分析了不同数目和不同频率正弦波集总电压源激励下的多导体受扰线终端负载串扰电压响应特性。研究结果表明,受扰线终端负载上的串扰电压响应主要频点的个数与集总电压源的个数相同,响应频点与集总电压源的频率相等,响应幅值与相应电压源离受扰线的间距有关。When voltage and current signals transmit on transmission lines,it can produce crosstalk responses on the other transmission lines.In this paper,the time domain BLT equation is used to set up the crosstalk model of multi-conductor transmission lines to multi-conductor transmission lines,and analyze the crosstalk voltage responses on the terminal loads of victim lines excited by different number of sine wave sources at different frequencies.The research results show that the number of main frequency of crosstalk voltage responses on terminal loads of victim lines is equal to the number of lumped voltage sources.The frequencies of crosstalk voltage responses are same with those of lumped voltage sources.The amplitudes of crosstalk voltage responses are concerned with the distance between lumped voltage sources and victim transmission lines.
关 键 词:复杂电磁环境 BLT方程 多导体传输线 串扰电压频谱
分 类 号:TM15[电气工程—电工理论与新技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.44