检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:崔小准[1] 钟兆丰[1] 刘崇华[1] 李懿[1] 赵毅[1]
出 处:《飞行器测控学报》2014年第1期15-19,共5页Journal of Spacecraft TT&C Technology
基 金:国家重大科技攻关项目(No.DHZX01A01004)
摘 要:针对传统的单载波扫频法不适于GNSS(全球导航卫星系统)信号生成通道的带宽测量的问题,提出了采用数字信号处理的信号带宽方法。对实际导航信号进行高速采样,在数字域对采样的导航信号和本地数字生成的理想导航信号进行频谱估计和计算,从而得到GNSS信号带宽。分别使用周期图法和Welch法谱估计,对提出的测试方法进行仿真。仿真结果表明,采用Welch法进行理想信号和实际信号谱估计,对谱估计后的结果进行计算,可以完成GNSS信号带宽精密测量,在Welch法估计参数设置合理的情况下,GNSS信号带宽估计的准确度可以达到99.9%以上。A signal bandwidth method using digital signal processing technology is proposed for measurement of the bandwidth of the signal generation channels of GNSS (Global Navigation Satellite System) systems as the traditional single-carrier frequency sweeping method is not suitable.After high-rate sampling of a GNSS signal,the spectrum of the actual GNSS signal and the ideal signal generated locally are evaluated in the digital domain.Simulation is done for the proposed measurement method using spectrum evaluation algorithm of periodogram and Welch method.The simulation results show that the GNSS signal bandwidth can be accurately measured as long as the spectrums of the ideal and actual signals are evaluated and calculated using Welch method.The GNSS signal bandwidth measurement accuracy is over 99.9 % if Welch evaluation parameters are set properly.
关 键 词:全球导航卫星系统(GNSS) 导航信号 带宽 测试 谱估计
分 类 号:V416.6[航空宇航科学与技术—航空宇航推进理论与工程] TN98[电子电信—信息与通信工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117