直列式安全起爆系统电磁兼容性改善及安全性分析  

Analysis on Improvement of Electromagnetic Compatibility and Safety of In-line Electronic Safety and Arming System

作　　者：施长军[1] 周涛[1] 郑松[2] 杜永龙[2] 李公法[1] 

机构地区：[1]西安近代化学研究所,陕西西安710065 [2]机电工程与控制国家级重点实验室,陕西西安710065

出　　处：《火工品》2014年第3期23-26,共4页Initiators & Pyrotechnics

摘　　要：鉴于直列式安全起爆系统在外界恶劣电磁环境下以及弹上电气工作时产生的涌浪电压、静电及电磁辐射等干扰因素,采用隔离设计、屏蔽电子线路、瞬态电压抑制器等方法减少电磁辐射、电磁干扰,改善了直列式安全起爆系统的电磁兼容性;并根据国军标电磁安全性评估方法,对直列式安全起爆系统在包装、裸露、工作状态下进行了电磁安全性测试分析。试验结果表明,通过电磁兼容改善后的直列式安全起爆系统在电磁辐射(EMR)、电磁干扰(EMI)、静电放电(ESD)环境危害中具有高安全性,完全满足大型战斗部对起爆技术的要求。Aiming at the problem of interference occurred in in-line electronic safety and arming system, which was caused by surge voltage, electrostatic and electromagnetic radiation in harsh electromagnetic environment in the outside world, as well as on-line of bomb, the methods such as isolation, shielding the circuit, transient voltage suppressors and other were adopted, the electromagnetic radiation （EMR） and electromagnetic interference （EMI） was reduced effectively, which improved electromagnetic compatibility of in-line electronic safety and arming system. Meanwhile, according to the military standard, the electromagnetic safety of in-line electronic safety and arming system was tested and analyzed under the package, nudity and working state condition. The experimental results showed that the improved in-line electronic safety and arming system has high safety in hazards ofEMR, EMI and electrostatic discharge（ESD）, which can meet with the requirements of large warhead.

关 键 词：直列式安全起爆系统 电磁兼容性 安全性 

分 类 号：TJ45[兵器科学与技术—火炮、自动武器与弹药工程]