测定电解锰中微量铁的FAAS法——采用EDTA作释放剂  

Determination of Trace Iron in Electrolytic Manganeseby FAAS with EDTA as Releasing Agent

作　　者：姚俊[1] 陈上[1] 肖卓炳[1] 庹永[1] 

机构地区：[1]吉首大学生命科学与化学学院,湖南吉首416000

出　　处：《分析测试学报》2001年第2期50-52,共3页Journal of Instrumental Analysis

基　　金：湖南省教委自然科学基金资助项目! (99C69)

摘　　要：用盐酸溶解试样 ,加入EDTA等螯合剂作释放剂 ,通过改变燃烧器高度调整原子蒸气的温度以消除99.8 %以上基体锰的干扰 ,然后用原子吸收光谱法直接测定电解锰中微量的铁 ,获得了满意的效果。其标准曲线法、标准加入法的结果相吻合 ,样品加标回收率为99.8 % ,相对标准偏差为3.1 %。方法简便快速 ,适于工厂的快速分析。The main purpose of the present work is to eliminate the interference of matrix manganese from determination of trace iron in electrolytic manganese by FAAS. After dissolution of sample into hydrochloric acid interference of matrix manganese, content of which is above 99.8%, can be eliminated by addition of EDTA as a releasing agent and adjustment of vaporizing temperature via change of combustion nozzle height. The results obtained by calibration curve method are in good conformity with the standard addition method. The recovery of the method is 99.8%, the relative standard deviation is 3.1%. The method proved to be rapid, accurate, and convenient. It is suitable for rapid industrial analysis.

关 键 词：释放剂 电解锰 火焰原子吸收光谱法 铁 微量分析 

分 类 号：TG145[一般工业技术—材料科学与工程] TG115.33[金属学及工艺—金属材料]