双物料预聚法合成减阻剂及性能评价  

DEVELOPMENT AND APPLICATION OF DRAG REDUCING AGENT HG-2 SYNTHESIZED BY DOUBLE MATERIAL PRE-POLYMERIZATION METHOD

作　　者：曹旦夫[1,2] 

机构地区：[1]中国石油大学(华东),山东青岛266555 [2]徐州金桥石化管道输送技术有限公司

出　　处：《石油炼制与化工》2014年第7期68-71,共4页Petroleum Processing and Petrochemicals

基　　金：中国石油化工股份有限公司科研项目(310016)

摘　　要：采用可控预聚的方式合成了HG-2成品油减阻剂,聚合物的黏均相对分子质量大于3.0×106。对柴油中加入50mg/L HG-2减阻剂后进行指标评价及台架试验和行车试验。结果表明:加入50mg/L的减阻剂,对柴油性质影响不大,能符合国家标准GB 252—2011普通柴油的要求;对车辆整体性能无明显的影响。在成品油管道进行了现场试验,加剂10mg/L后,柴油增输率可达30.1%;加剂8mg/L后,雷诺数分别为52 411,70 940,78 087时,对应的增输率分别为26.8%,30.2%,38.6%,增输效果较好。Synthesized HG-2 oil drag reducing agent （DRA） by a new controllable pre-polymeriza- tion technology was prepared. The polymer average molecular weight is greater than 3.0 × 10^6. Performance evaluation, bench test and road test of diesel fuel with 50 mg/L DRA were conducted. Results show that adding 50 mg/L DRA into diesel fuel has no obvious influence on the vehicle performance and the quality can conform to the GB 252--2011 national standard. Field experiment in oil pipeline was conducted. The delivery rate increase of diesel with DRA 10 mg/L can be up to 30.1%. With 8 mg/L DRA, at Reynolds number of 52 411, 70 940 and 78 087, the corresponding delivery rate increase is 26.8%, 30. 2% and 38. 6%, respectively.

关 键 词：可控预聚 柴油 减阻剂 评价 增输率 雷诺数 

分 类 号：TE624.8[石油与天然气工程—油气加工工程]