检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:辛彩妮 韩叶茂[1,2] 宋春梅[3] 赵杰[1,2] 周敏[1,4] 李来风[1,4] 黄传军[4]
机构地区:[1]中国科学院理化技术研究所航天低温推进剂技术国家重点实验室,北京100190 [2]中国科学院大学,北京100049 [3]遵义师范学院,遵义563002 [4]中国科学院理化技术研究所中国科学院低温工程学重点实验室,北京100190
出 处:《低温工程》2014年第3期36-40,共5页Cryogenics
基 金:国家自然科学基金(No.51232004);航天低温推进剂技术国家重点试验室基金(SKLTSCP1202)项目资助
摘 要:利用机械合金(MA)和放电等离子(SPS)烧结方法,制备出Bi85Sb15/x mol%AlN(x=0,0.1,0.2,0.3)块体材料。在77—300 K温区内,测试了块体材料的电导率、Seebeck系数、霍尔系数和热导率,并由此计算出材料的zT值。结果表明:纳米AlN分散的Bi85Sb15材料,随着AlN含量的增加,样品的迁移率升高,从而明显提高材料的电导率,但Seebeck系数绝对值呈减小趋势。适量的纳米AlN的引入可以形成散射中心,增加对声子的散射作用,降低热导率。当基体Bi85Sb15中加入0.1mol%AlN时,其zT值在250 K取得最大值~0.32,比基体在此温度下的zT值提高了45%。Bi85Sb15/x mol% AlN( x = 0,0. 1,0. 2,0. 3) bulk materials were fabricated by mechanical alloying( MA) and spark plasma sintering( SPS). The electrical conductivities,Seebeck coefficients,Hall coefficients and thermal conductivities were investigated in the temperature range from 77 K to 300 K. As a result,with the increase of nano-AlN content,the electrical conductivities were improved significantly because of the increasing mobility but the absolute Seebeck coefficients tended to decrease. The proper nanoAlN dispersed in Bi85Sb15can be scatter centers and decrease the thermal conductivity. The maximum zT value of ~ 0. 32 was achieved at 250 K for the sample Bi85Sb15/0. 1 mol% AlN,which was increased 45%than that of Bi85Sb15matrix at the same temperature.
关 键 词:Bi85Sb15材料 纳米AlN 热电性能
分 类 号:TB383[一般工业技术—材料科学与工程] TB66
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145