检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:周海峰[1] 马峰[1] 李梅[1] 卢熹[1] 王树山[1]
机构地区:[1]北京理工大学爆炸科学与技术国家重点实验室,北京100081
出 处:《战术导弹技术》2014年第3期99-104,共6页Tactical Missile Technology
摘 要:利用ANSYS/LS-DYNA有限元仿真软件,对掠海飞行导弹撞击水幕的动态过程进行模拟,分析了水幕厚度对导弹飞行速度、弹体载荷以及弹体头部压力的影响。分析结果表明:水幕厚度变化对弹体飞行速度变化影响很小;导弹整体过载与水幕厚度以及弹体初速有关,水幕厚度小于0.4 cm或大于8 cm时弹体的轴向过载随弹体速度增加而增加;当弹体飞行速度在300 m/s左右,弹体头部获得最大的冲击压力。数值研究结果为分析研究爆炸水幕形成技术以及水幕反导毁伤机理提供了数据支撑。The slightly sea flying missiles impacting water curtain is simulated by ANSYS/LS-DYNA fi- nite element simulation software. The effects to the missile flight speed, load, and projectile head pres- sure are analyzed with the changes of water curtain thickness. The results show that water curtain thick- ness variation has little effect on missile flight speed change. Missile overall overload is determined by water curtain thickness and projectile initial velocity. Missile axial overload is improved as the projectile velocity increased when water curtain thickness is less than 0.4 em or greater than 8 cm. Projectile head get maximum impact pressure when the missile flight speed is at 300 m/s. The result of numerical simu- lation can provide important data support for the research on explosion water curtain forming technology and water curtain antimissile damage mechanism.
分 类 号:TJ760[兵器科学与技术—武器系统与运用工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15