检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李永琴
出 处:《建材技术与应用》2014年第3期18-21,共4页Research and Application of Building Materials
基 金:山西省交通厅科技项目(08-12)
摘 要:测试了国产环氧沥青混合料的水稳定性能、高温稳定性能、低温抗裂性能以及抗疲劳性能指标。在混凝土桥面铺装时,对国产多组分环氧沥青混合料高温、低温稳定性和水稳定性指标的检验,应在环氧沥青基本固化后进行,固化温度及固化时间采用120℃,12 h(或125℃,4 h)。混合料的各项技术指标控制为:车辙试验动稳定度DS≥25 000次/mm(60℃),或DS≥15 000次/mm(70℃);浸水马歇尔残留稳定度≥85%;冻融劈裂残留强度比TSR≥85%;-10℃低温弯曲应变εB≥3.0×10-3。The water stability, high temperature stability, low temperature crack resistance and fatigue performance of domestic epoxy asphalt mixture are tested in this essay. In the concrete bridge deck pavement, the test of domestic epoxy asphalt mixture high and low temperature stability dynamic stability and water stability should be conducted when epoxy asphalt solidifies:the stetting temperature and time is 120 ℃ ,12 h(or 125 ℃ ,4 h). The technical index of the mixture is:Rutting test dynamic stability DS 25,000 times/mm( 60 ℃ ) or DS ≥ 15,000 times/mm (70 ℃);Marshall immersion residual stability ≥85%; Freeze- thaw splitting residual strength ratio TSR 85%; -10 ℃ Low temperature bending strain ε8 ≥3.0×10^-3.
关 键 词:环氧沥青混合料 混凝土桥面铺装 水稳定性 高温稳定性
分 类 号:U443.33[建筑科学—桥梁与隧道工程] U414.7[交通运输工程—道路与铁道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.116.112.164