提高青海某铁金矿金浮选回收率的研究与实践  

Investigation and Practice of Increasing Gold Recovery of an Iron-gold Ore from Qinghai

作　　者：潘炳 王奉刚 张蕴灵 赵卫夺 肖松文 

机构地区：[1]长沙矿冶研究有限责任公司,湖南长沙410012 [2]青海省循化县谢坑铜金矿,青海循化811100

出　　处：《矿冶工程》2014年第3期33-36,共4页Mining and Metallurgical Engineering

摘　　要：针对青海某铁金矿金浮选回收率偏低(仅有80%)的问题开展了系统研究,发现磨矿粒度偏粗是原来生产金浮选回收率低的关键原因。通过试验确定适宜的磨矿粒度为-0.074 mm粒级占80.40%,该磨矿粒度下采用一粗-两精-两扫的浮选工艺流程,闭路试验获得了精矿金品位93.86 g/t、回收率87.96%的良好指标。现场改造在基本不改变浮选工艺流程及药剂制度情况下,仅降低磨矿粒度,取得了明显的效果,金回收率提高到87.5%。The lower recovery from gold flotation （around grinding, an investigation on the beneficiation parameters appropriate grinding fineness of -0.074 mm 80.40% was stage of roughing, two stages of cleaning and two stages of 80%） could be mainly attributed to of an iron-gold ore from Qinghai the coarse fineness of ore was carried out, and the determined. Adopting a flotation flowsheet consisting of one scavenging, a gold concentrate with gold content and recovery of 93.86 g/t and 87.96%, respectively, was obtained from the closed-circuit test. An in-situ technical transformation by reducing the grinding fineness with basically the same flotation flowsheet and reagent system leads to the gold recovery up to 87.5%, presenting a manifest imorovement.

关 键 词：铁金矿 磨矿粒度 浮选 回收率 金 

分 类 号：TD923[矿业工程—选矿]