高速铣削22SiMn2TiB高强度钢的铣削力建模与试验研究  

Modeling and Experimental Study of Milling Force in High-speed Milling of High Strength Steel 22SiMn2TiB

作　　者：王林林[1] 焦黎[1] 王西彬[1] 

机构地区：[1]北京理工大学先进加工技术国防重点学科实验室,北京100081

出　　处：《成组技术与生产现代化》2014年第2期58-62,共5页Group Technology & Production Modernization

基　　金：国家自然科学基金资助项目(51105035)

摘　　要：通过涂层硬质合金刀片对22SiMn2TiB高强度钢进行四因素四水平的正交铣削试验,采集切削力信号,对试验数据进行方差分析(ANOVA),得到了切削参数对铣削力影响的规律.通过多元线性回归建立了两个铣削力预测经验模型——二次模型和指数模型,并进行了模型的显著性分析,发现二次模型优于指数模型,指数模型对Fz的拟合效果差.Through the four-factor four-level orthogonal experiments in which high-strength steel 22SiMn2TiB was milled with high speed by coated carbide tools ,the milling force was measured .Through the analysis of variance（ANO-VA） of experiment results , the effect of experimental pa-rameters on cutting force is analyzed .By multiple linear re-gression method ,two empirical models（an exponential model and a quadratic model） are established ,and then the signifi-cance of two models is analyzed .It is found that the quadrat-ic model is better than the exponential model and the expo-nential model is not fit for the predicting of the Fz force .

关 键 词：经验模型 切削力 高强度钢 高速切削 

分 类 号：TG501[金属学及工艺—金属切削加工及机床]