基于Multisim的非正弦波信号发生器设计与仿真  

Design and simulation of non-sinusoidal wave signal generator based on Multisim

作　　者：张爱英[1] 毛战华[1] 

机构地区：[1]青岛农业大学理学与信息科学学院,山东青岛266109

出　　处：《现代电子技术》2014年第13期146-149,152,共5页Modern Electronics Technique

基　　金：青岛农业大学院级重点课程(YZDK1141)

摘　　要：在电子电路中,矩形波、三角波、锯齿波统称为非正弦波,所设计的非正弦波信号发生器以矩形波发生电路为基础,在其输出端加积分运算电路及相应的辅助电路产生三角波或锯齿波信号,辅以外围电路设计,实现信号频率、幅值、占空比调节。在Multisim 10开发环境中搭建该电路并进行了验证分析,结果表明,电路达到了设计要求,实现了预期功能。Rectangular wave,triangle wave and sawtooth wave are collectively referred to as non-sinusoidal wave in the electronic circuit. The non-sinusoidal signal generator designed in this paper is based on a rectangular wave generating circuit. It can generate triangle wave or sawtooth wave by adding an integral circuit and auxiliary circuit at its output end. The signal ampli-tude,frequency and duty ratio can be controlled by designing the auxiliary circuit. This circuit was built and analysed in the Multisim 10 development environment. The results show that the circuit meets the design requirements and can realize the ex-pected function.

关 键 词：非正弦波 信号发生器 仿真 MULTISIM 10 

分 类 号：TN702-34[电子电信—电路与系统]