拔钉延迟时间对木结构用材握螺钉力性能的影响  

Effects of Screw Extracting Delay Time on Withdrawal Strength of Wood Structural Materials

作　　者：阙泽利[1] 杨玲[2] 王菲彬[3] 王永兵 吴勇 

机构地区：[1]南京林业大学材料科学与工程学院,江苏南京210037 [2]南京林业大学研究生院,江苏南京210037 [3]南京林业大学风景园林学院,江苏南京210037 [4]苏州皇家整体住宅系统股份有限公司,江苏苏州215105

出　　处：《木材工业》2014年第4期32-35,共4页China Wood Industry

基　　金：江苏高校优势学科建设工程资助项目"不同国家规格材强度性能评价方法及相关性研究"(PAPD201102);南京林业大学引进高层次人才基金"木结构中各种木基结构板材钉接合性能的研究"(163020031);苏州市吴中区创新创业领军人才资助项目"高温高湿高盐环境对木结构建筑用材性能的影响及检测装备的研发"(WC201322)

摘　　要：为了获取木结构螺钉连接强度的基础数据,探讨拔钉延迟时间对三种木结构用材握螺钉力性能的影响。试验结果表明:1)3种材料的握螺钉力依次为:落叶松规格材(纵面)>杨木胶合板(板面)>杨木单板层积材(板面);2)随着拔钉延迟时间的延长,落叶松规格材的纵向握螺钉力几乎没有变化;杨木单板层积材和胶合板的板面握螺钉力均呈现先增大、后逐减、再趋于平稳的趋势,其中杨木胶合板的板面握螺钉力变化幅度更小。Three kinds of structural materials, larch lumber, poplar laminated veneer lumbers （LVL） and poplar plywood were selected to evaluate the effects of screw extracting delay time on withdrawal strength of the materials. The results found that the vertical screw withdrawal strength for larch lumber was higher than the face withdrawal strength of poplar LVL and poplar plywood. With the extension of screw extracting delay time, larch vertical withdrawal strength kept almost the same, while the face withdrawal strength of poplar LVL and plywood increased at the beginning and then decreased until stabilized. The change in the face withdrawal strength of the poplar plywood was smaller than poplar LVL.

关 键 词：落叶松 规格材 杨木 单板层积材 胶合板 握螺钉力 延迟时间 

分 类 号：TU366.2[建筑科学—结构工程]