YAG激光器泵灯聚光腔的改进  

Improved Pump-condensing and Cooling Cavity of YAG Laser

作　　者：翁兴涛[1] 伍建军[1] 聂辉[1] 

机构地区：[1]武汉大学光电信息工程学院,武汉市珞喻路129号430079

出　　处：《武汉大学学报（信息科学版）》2001年第2期177-182,共6页Geomatics and Information Science of Wuhan University

摘　　要：设计了一种改型的YAG激光器聚光腔 ,在椭圆柱反射面内加入一玻璃套管 ,进行准全腔冷却 ,综合了传统的全腔冷却和分别冷却的优点 ,但灯、棒需向椭圆柱面焦线内作一位移。为此建立了光线传输的数学模型 ,经计算机编程运算 ,找出最佳的灯、棒配置 ,使灯轴发出的同心光束几乎同心地会聚于棒芯。An improved type of pumping lamp condenser and cooling cavity for YAG laser is designed and described, where a quartz glass tube is inserted between the elliptically cylindrical mirror cavity and the pumping lamp and laser rod,and the cooling water is flowed through the tube with lamp and rod immersed in it. This kind of modified configuration has advantage over current cavities. Its cooling efficiency is higher than that of lamp and rod respective cooling structure, and its gold_coated mirror protection is better than that of the full cavity cooling structure.In the current structure, the pumping lamp and the laser rod are set in the position of two focal axes of the elliptically cylindrical mirror, which are conjugate, without any spherical aberration, according to the geometry. However, this condition is not properly satisfied in the improved configuration and the conjugate should be consulted by computer manipulation. Therefore the mathematical formulae for ray tracing in this special system are derived and the evaluation criterion is determined. The refraction indices of water and quartz glass are calculated for wavelength and respectively, which are emitted from the pumping lamp and absorbed by YAG laser rod. The ray tracing program is compiled and the results are investigated. It is concluded that the pumping lamp and the laser rod should be shifted forward to each other from the foci of that mirror and the optimum conjugate can be found so that the concentric beam from the lamp is nearly concentrically converged to the rod.

关 键 词：YAG激光器 泵浦聚光腔 腔冷却 光线追迹 技术改进 数学模型 

分 类 号：TH744.5[机械工程—光学工程] TN248[机械工程—仪器科学与技术]