检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]哈尔滨建筑工程学院金属结构研究室 [2]哈尔滨建筑工程学院工理所
出 处:《哈尔滨建筑工程学院学报》1991年第1期29-36,共8页
基 金:国家自然科学基金
摘 要:本文根据双曲抛物面鞍形屋面模型的风洞实验,得到了风压分布系数的初步结果.实验是分别在模拟的大气边界层和均匀流两种流场中进行的.我们根据不同风向作用下屋面风压的实测分布规律,给出了最大风压系数和整个屋面的平均风压系数.另外还就不同矢跨比(F/L=1/10~1/20)的模型进行了实验.由这些实验结果表明,风向对屋面风压分布起着最为重要的作用.在所研究的矢跨比范围内,最大风压系数C_P=-4.6q,最大平均风压系数(绝对值)(?)_p=-0.75q(q 为速压).Wind pressure distribution was investigated on the hyperbolic paraboloid(H.P.)shaped shell roofs by model test in the wind tunnel with smooth flow and tur-bulent flow.Wind pressure distribution and the contours of wind pressure on shellroofs were determined for various wind directions.The average suctions of the roofswere computed.The effects of the rate of sag and span on the pressure distributionwere studied by a series of models.It was concluded that the wind direction wasthe most important factor that affects the wind pressure distribution on H.P.-shaped shell roofs.The highest point suction encountered was -4.6q while themaximum average suction on the roof was -0.75q.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229