模具曲面抛光过程中表面去除的试验研究  

Experimental Study on Material Removal in Robotic Polishing of Mold Curved Surfaces

作　　者：张雷[1] 袁楚明[1] 周祖德[1] 陈幼平[1] 

机构地区：[1]华中理工大学机械学院数控所,湖北武汉430074

出　　处：《汽车工艺与材料》2001年第2期1-3,共3页Automobile Technology & Material

基　　金：国家自然科学基金资助!项目( 59875026)

摘　　要：本文分析了模具曲面抛光工艺过程，指出了影响抛光过程中表面去除的主要因素，并利用在 PUMA－ 562型机器人上开发的模具自动抛光试验系统对抛光的表面去除问题进行了试验研究，得到了模具曲面抛光时表面去除的规律，对自动抛光工艺规划具有指导意义。This paper analyzes the polishing process of mold curved surfaces and points out the major factors influencing the material removal during polishing. Based on the established experimental robotic polishing system, the material removal is studied experimentally and the material removal regularities in mold curved surface polishing are obtained, which is of importance for automatic polishing process planning.

关 键 词：抛光 表面去除 模具曲面 试验研究 

分 类 号：TG760.6[金属学及工艺—刀具与模具] TG580.692