官能化聚烯烃弹性体增韧PA1010体系Ⅰ.力学性能及形态结构的研究  

TOUGHENING PA1010 WITH A FUNCTIONALIZED POLYOLEFIN ELASTOMER (Ⅰ) STUDY ON MECHANICAL PROPERTIES AND MORPHOLOGIES

作　　者：陈红兵[1] 姜国伟[1] 杨秉新[1] 张皓瑜[1] 

机构地区：[1]中国科学院长春应用化学研究所24室,吉林长春130022

出　　处：《高分子材料科学与工程》2001年第2期45-48,52,共5页Polymer Materials Science & Engineering

摘　　要：通过接枝马来酸酐 ( MA) ,实现了聚烯烃弹性体乙烯 -α-烯烃共聚物 ( EOCP)的官能化 ,建立了测定接枝率的方法。EOCP的官能化显著地改善了它与 PA10 10的相容性 ,实现了 PA10 10的增韧。膜抽提实验证实了原位共聚物的生成。扫描电镜 ( SEM)形态分析显示 ,弹性体的官能化显著地增强了弹性体与PA10 10之间的界面粘合 ,有效地抑制了弹性体粒子在共混过程中的聚集 ,使弹性体粒子更细小更均匀地分散于 PA10 10基体之中 ,导致了 PA10A new polyolefin elastomer, ethylene α olefin copolymer(EOCP), has been functioned by grafting with maleic anhydride(MA) and then used to toughen PA1010. Good results have been achieved in the mechanical properties. The formation of in situ copolymer between PA1010 and EOCP g MA was verified through an extraction test. The morphology was measured by the means of SEM. It was obviously that the grafting of MA on EOCP improves the interfacial adhesion of PA1010 and EOCP, and the in situ copolymer functions as an emulsifier to prevent the aggregation of elastomer particles during extrusion.

关 键 词：官能化 聚烯烃弹性体 尼龙1010 力学性能 形态结构 

分 类 号：TQ334.9[化学工程—橡胶工业]