最小开关损耗VSVPWM技术的研究与仿真  

Study and Simulation of Minimum Switching Losses VSVPWM Technique

作　　者：张桂斌[1] 徐政[1] 

机构地区：[1]浙江大学电机系,310027

出　　处：《电工技术学报》2001年第2期34-40,共7页Transactions of China Electrotechnical Society

基　　金：国家自然科学基金资助项目 !5 970 70 0 5

摘　　要：分析了电压空间矢量PWM (VSVPWM )的基本原理 ,指出在VSVPWM中每相每周期最多可有 12 0°的扇区不开关 ,通过零矢量作用时间的适当分配可以连续调整不开关扇区的位置。在此基础上提出了一种根据负荷功率因数角动态分配零矢量的方法 ,并引入了不开关扇区滞后角的概念。这种方法开关损耗最小 ,并可有效降低开关器件的最大开关电流 ,仿真结果证明了其可行性。The basic principle of Voltage Space Vector PWM is analyzed. It is shown that the switch status may not change in 120° sectors at most for each phase in a cycle, and the positions of the non switching sectors can be adjusted continuously by allocating the duty time of the two zero vectors properly. Furthermore, a method is proposed to choose the zero vectors dynamically according to the power factor angle of the load, and the concept of the lag angle of non switching sectors is proposed and defined. Using this method, the minimum switching losses can be reached, and the maximum switching current can be reduced effectively. This has been shown in the simulation results. In addition, the realization of the above method by the Harmonic Injection PWM method is also presented.

关 键 词：电压空间矢量PWM 开关损耗 仿真 直流制输电 

分 类 号：TM721.1[电气工程—电力系统及自动化] TM743