C-dump变换器开关的工作方式及其对调速系统的影响  

Influence on Timing System of Switch Operating Model Based on C-dump Converter

作　　者：耿云亮[1] 周波[1] 傅颖[1] 

机构地区：[1]南京航空航天大学自动化学院,南京210016

出　　处：《南京航空航天大学学报》2001年第2期118-121,共4页Journal of Nanjing University of Aeronautics & Astronautics

基　　金：航空基础科学基金! (编号 :97F52 0 52

摘　　要：讨论了无刷直流电机调速系统中 C-dump(电容储能型 )变换器斩波开关的工作方式对变换器储能电容电压和电机电流的影响 ,对斩波开关提出了三种控制方法 :滞环控制、PWM控制以及滞环结合 PWM控制。本文对其与主开关的配合方式进行了详细的分析与比较 ,给出了系统在各种方式下的实验结果。研究表明 ,C-dump变换器的斩波开关采用滞环控制与 PWM控制相结合的方式工作能较好地减小电机电流脉动 ,进而减小电磁转矩脉动 。Influence on the current and the torque ripple with the switch operating model of a PMBDC motor based on C dump converter is analyzed. In order to improve the performance of the system and to cut down the torque ripple, several kind co operations of the chopping switch and the power switch are proposed, such as lag loop control, PWM control and lag loop with PWM control. And they are studied and compared in both theory and practice. Simulational and experimental waves are also offered. The results indicate that lag loop with PWM control on the chopping switch can reduce the ripple of the phase current and the torque. It can fairly meet the request of the system.

关 键 词：无刷电机 C-DUMP变换器 电流脉动 储能电容 斩波开关 

分 类 号：TM301.2[电气工程—电机] TN86[电子电信—信息与通信工程]