检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
出 处:《材料科学与工艺》2001年第2期146-149,共4页Materials Science and Technology
摘 要:用熔铸工艺过程中的原位反应合成方法制备了含 φ(TiC)为 5 %颗粒增强的H13钢基复合材料 .实验结果表明 ,用本文工艺制备的复合材料工艺性能优良 ,易于加工成形 .显微组织中TiC颗粒分布均匀 ,没有出现颗粒的团聚及由于TiCP颗粒引入而形成的组织缺陷 .TiC颗粒的加入能有效地提高材料的常温、高温强度和耐磨性能 。In the present investigation TiC P/H13 steel composites with 5vol%TiC P were prepared by in situ reaction during melting processing. Experimental results show that the composites have good workability and machinability. The distribution of TiC particles in the microstructure is quite uniform and no apparent particle segregation and microdefects are observed. The addition of TiC particles results in a significant increase in strength at normal and elevated temperatures and wear resistance, but a decrease in ductility and toughness.
关 键 词:复合材料 力学性能 原位反应 显微组织 H13钢 碳化钛颗粒增强
分 类 号:TB333[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.179