一种复合驱用商品表面活性剂的高效液相色谱法测定  

Quantitative Determination of Commercial Surfactant SL-1 for ASP Flooding by Using HPLC

作　　者：曹绪龙[1] 施晓乐[1] 隋希华[1] 江小芳[1] 王贺振[1] 蒋生祥[2] 刘霞[2] 

机构地区：[1]胜利石油管理局地质科学研究院,山东东营257015 [2]中科院兰州化学物理研究所,甘肃兰州730000

出　　处：《油田化学》2001年第2期177-180,共4页Oilfield Chemistry

摘　　要：胜利油田研制的一个三元复合驱配方中含有辅助表面活性剂SL 1,这是一种厂家未提供成份的商品表面活性剂。为了分析注入和采出液中SL 1的浓度 ,研制了两种液相色谱柱填料ODS和SAX ,将两柱串联 ,这一双组份表面活性剂流过双柱后产生对称的单一色谱峰 ,从而实现了定量测定。水样中与SL 1共存的物质如Na2 CO3 、主表面活性剂、聚合物及矿化成份不干扰SL 1的测定。所建立的这种HPLC方法的最小检出限为 0 .4mg/L ,线性范围为 5 0— 10 0 0mg/L ,回收率为 95 .7%— 99.8%In a newly developed ASP flooding solution a commercial surfactant of unknown chemical composition, SL 1, is introduced as cosurfactant. In this work two column packs(stational phases ODS and SAX for HPLC) are prepared and it is ascertained by using HPLS on these columns that SL 1 is composed of a nonionic and an anionic components and on ODS SAX columns in series a single, normal retention peak is obtained for SL 1. Thus an HPLC method of quantitative determination of SL 1 is established. No interference of Na 2CO 3, HPAM, and mineral salts which exist in ASP flooding and recovered solutions is observed. For this analytical method the detectable limit 0.4 mg/L, the linear range 2.0—400 mg/L, and the recovery rate 95.7—99.8%.

关 键 词：表面活性剂 复配 定量测定 高效液相色谱法 硅胶基固定相 三元复合驱油液 

分 类 号：TE39[石油与天然气工程—油气田开发工程] O657.72[理学—分析化学]