搭接参数对激光熔凝处理层显微组织和性能的影响  

Influence of Connecting Parameter on Microstructure and Mechanical Properties of Laser Melting Solidified Layer

作　　者：王贵[1] 周新初[1] 顾永强[1] 王建国[1] 麻永林[1] 

机构地区：[1]包头钢铁学院材料科学与工程系,包头014010

出　　处：《金属热处理》2001年第6期16-18,共3页Heat Treatment of Metals

基　　金：内蒙古自治区科技攻关项目! ( 990 12 9)

摘　　要：应用 3kW连续CO2 激光器对轧辊钢进行激光熔凝搭接处理 ,分析了搭接区的显微组织和硬度。结果表明 ,搭接区的组织分布特征和光斑中心基本一样 ,包括搭接熔凝区、搭接相变区和搭接热影响区 ,搭接区的显微硬度分布和光斑中心也相同 ,且当搭接参数合适时 ,可得到较均匀的表面硬化层。WT5”BZ]Laser melting and connecting treatment on rolling steel has been performed with a 3kW continuous wave CO 2 laser,the microstructure and the microhardness have been analyzed.The results showed that the connecting zone’s characteristics of the microstructure is basically the same as the laser beam center.It is composed of connecting melting zone,connecting quenching zone and connecting heat influence zone.The connecting microhardness is also the same as the laser beam center.A even hardened layer has been obtained when the parameter is suitable.

关 键 词：搭接量 激光熔凝处理 显微组织 显微硬度 轧辊钢 

分 类 号：TG161[金属学及工艺—热处理]