T10钢渗钒及渗后热处理对组织和性能的影响  

The Effects of Vanadizing and Post Heat Treatment on Structures and Properties of Steel T10

作　　者：刘智勇[1] 彭日升[1] 刘杰[1] 王兴贵 

机构地区：[1]天津大学机电分校

出　　处：《金属热处理》1991年第2期13-18,共6页Heat Treatment of Metals

摘　　要：研究了T10钢渗钒后不同预处理对最终热处理的组织和性能的影响。结果表明,渗后空冷,未能消除渗钒对基体组织造成的损害,最终热处理后,材料性能明显低于常规处理件,渗后空冷(或油冷),经低温正火或快速球化退火预处理,消除了渗钒对基体组织造成的损害。最终热处理后,渗钒件的强度与常规处理件基本相近,a_K值提高56～72%,基体K_(IC)提高23～27%。The effect of different pre-heat treatments after vanadizing on the structures and properties of final heat treatment of steel T10 were studied. The result showed that in case of the air cooling after vanadizing the damage from vanadizing on the base structure was not eliminatedAnd by final heat treatment, its properties were obviously decreased as compared with that of the conventional process treated. After the vanadizing and air cooling (or oil cooling), the damage from vanadizing on the base structure could be eliminated by low-temperature normalizing or rapid spheroidizing annealing. And by final heat treatment the bending strength of the samples is the same as that of the conventional treated, the impact toughness can increase 56～72% and the fracture toughness of base increase 23～27%.

关 键 词：T10钢 渗钒 热处理 

分 类 号：TG161.8[金属学及工艺—热处理]