CANDU 6核电站反应堆物理启动  

CANDU 6 Nuclear Power Plant Reactor Physical Startup

作　　者：陈明军[1] 

机构地区：[1]秦山第三核电有限公司工艺系统处

出　　处：《核科学与工程》2001年第2期166-175,共10页Nuclear Science and Engineering

摘　　要：ＣＡＮＤＵ６堆调试期间的物理启动和物理调试试验主要在Ｂ阶段和Ｃ阶段进行，同时也包括Ａ阶段的堆芯装料后的临界监督。基于韩国月城４号机组的物理调试，介绍了物理调试试验数据的预模拟分析、试验方法以及试验结果的分析和评估，并指出了试验中的重要注意事项。Physical startup and physical commissioning test of CANDU 6 during commissioning are primarily performed at Phases B and C, and critical monitoring after fuel loading at PHASE A is also included. Based on physical commissioning of Wolsong Unit 4 of Korea, the pre-modeling analysis, test method as well as analysis & evaluation of the test results of the physical commissioning test data, indicating the points for attention during testing are presented.

关 键 词：CANDU6堆 物理启动 物理调试试验 PHASE-B PHASE-C 物理模拟分析 反应堆 重水堆核电站 

分 类 号：TM623.92[电气工程—电力系统及自动化]